<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>Research institute of Petroleum Industry (RIPI)</PublisherName>
				<JournalTitle>Journal of Petroleum Research</JournalTitle>
				<Issn>2345-2900</Issn>
				<Volume>29</Volume>
				<Issue>98-2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2019</Year>
					<Month>06</Month>
					<Day>22</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Surface Modification of PES Nanofiltration Membrane by Chitosan-GO Nano-plates Coating for Reduction of Fouling and Performance Enhancement</ArticleTitle>
<VernacularTitle>Surface Modification of PES Nanofiltration Membrane by Chitosan-GO Nano-plates Coating for Reduction of Fouling and Performance Enhancement</VernacularTitle>
			<FirstPage>46</FirstPage>
			<LastPage>60</LastPage>
			<ELocationID EIdType="pii">959</ELocationID>
			
<ELocationID EIdType="doi">10.22078/pr.2018.3295.2518</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Abdolreza</FirstName>
					<LastName>Moghadassi</LastName>
<Affiliation>Department of Chemical Engineering, Faculty of Engineering, Arak University, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Ehsan</FirstName>
					<LastName>Bagheripour</LastName>
<Affiliation>Department of Chemical Engineering, Faculty of Engineering, Arak University, Iran</Affiliation>

</Author>
<Author>
					<FirstName>Seyed Mohsen</FirstName>
					<LastName>Hosseini</LastName>
<Affiliation>Department of Chemical Engineering, Faculty of Engineering, Arak University, Iran</Affiliation>
<Identifier Source="ORCID">0000-0002-3974-5312</Identifier>

</Author>
<Author>
					<FirstName>Fahime</FirstName>
					<LastName>Parvizian</LastName>
<Affiliation>Department of Chemical Engineering, Faculty of Engineering, Arak University, Iran</Affiliation>
<Identifier Source="ORCID">0009-0009-7063-1119</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2018</Year>
					<Month>05</Month>
					<Day>13</Day>
				</PubDate>
			</History>
		    <Abstract>In the current study, prepared PES nanofiltration membranes with phase inversion method were modified by the novel composite chitosan/GO (graphene oxide) nano-sheets coating process and the effect of coating on performance and membrane antifouling properties was investigated. The results revealed that the salt rejection strongly improved, and their hydrophilicity enhanced rather than PES. The rejection increased from 68% for PES to 94% due to pore size reduction and improvement in adsorption. But permeability flux was decreased by increasing skin layer after coating. In addition, contact angle was decreased because of chitosan and GO nano-sheets hydrophilic nature. The surface morphology was changed from rough surface to smoother one by coating. Finally, flux recovery ratio and total fouling ratio were in good agreement with contact angle results and roughness parameters. Moreover, an increase in flux recovery ratio and reduction of total fouling ratio indicated successfully enhancement of antifouling properties of membrane by coating of chitosan/GO nan-osheets.  </Abstract>
			<OtherAbstract Language="FA">In the current study, prepared PES nanofiltration membranes with phase inversion method were modified by the novel composite chitosan/GO (graphene oxide) nano-sheets coating process and the effect of coating on performance and membrane antifouling properties was investigated. The results revealed that the salt rejection strongly improved, and their hydrophilicity enhanced rather than PES. The rejection increased from 68% for PES to 94% due to pore size reduction and improvement in adsorption. But permeability flux was decreased by increasing skin layer after coating. In addition, contact angle was decreased because of chitosan and GO nano-sheets hydrophilic nature. The surface morphology was changed from rough surface to smoother one by coating. Finally, flux recovery ratio and total fouling ratio were in good agreement with contact angle results and roughness parameters. Moreover, an increase in flux recovery ratio and reduction of total fouling ratio indicated successfully enhancement of antifouling properties of membrane by coating of chitosan/GO nan-osheets.  </OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Nano Filtration Membrane</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Surface Modification</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Chitosan</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Graphene Oxide Nano-sheets</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Anti Fouling</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://pr.ripi.ir/article_959_0f840be9b8db4d3fbd5ba2ce59211f55.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
