. Gao C., Rajeswaran T., Curtin U., and Nakagawa E., “A literature Review on Smart-Well Technology”, presented to the SPE 106011 and Operations Symposium held in Oklahoma, U.S.A., 31 March-3 April, 2007 .
. Yeten B., Durlofsky L.J., and Khalid A., Optimization of Smart Well Control, presented to the SPE.Conf,held in Calgary, Alberta ,Canada, pp. 4-7 November, 2002.
. Oberwinker C., Stundner M., and Team D., “From real time data to production optimization” presented to the SPE 87008 Asia pacific Conference, pp. 29-30 March, 2004.
. Naus M.M.J.J, Dolle N., and Jansen J.,-D “Optimization of commingled production using infinitely variable Inflow Control Valves”, presented to the SPE 90959 Annual technical Conference and Exhibition , Houston, pp. 26-29 September, 2005 .
5]. Yeten B., Brouwer D.R., Durlofsky L.J, and Aziz K. “Decision analysis under uncertainty for smart well deployment”, Journal of petroleum Science & Engineering, 43, pp. 183-199, 2004.
. Aitokhuehi I., and Durlofsky L.J., “Optimization the performance of smart wells in complex reservoirs using continuously updated geological models”, Journal of petroleum Science & Engineering, 48, pp. 254-264, 2005.
. Taware S., Sharme M., Alhuthali A.H., and Gupta A.D., “Optimal water flood management under geological uncertainty using accelerated production strategy”, presented to the SPE 133882 Annual technical Conference and Exhibition held in Florence, Italy, pp. 19-22, September 2010.
. Alhuthali A.H., Gupta A.D., Yuen B., and Fontanilla J.P., “Field applications of waterflood optimization via optimal rate control with smart well”, presented to the SPE 118948 Reservoir Simulation Symposium held in The Woodlands, Texas, pp. 2-4, February 2009.
. Van Essen G.M., Jansen J.D., Brouwer D.R., Douma S.G., Rollett K.I., and Harris D.P., “Optimization of smart wells in the St. Joseph Field”, presented to the SPE 123563 Asia Pacific Oil and Gas Conference and Exhibition held in Jakarta, Indonesia, pp. 4-6, August 2009.
. Alhuthali A.H., Gupta A.D., Yuen B., and Fontanilla J.P., “Optimal rate under Geologic Uncertainty”, presented to the SPE/DOE 113628 improved oil recovery symposium held in Tulsa, Oklahoma, U.S.A, pp. 19-23, April 2008.
. Shuai Y., White C.D., Zhang H., and Sun T., “Using multiscale regularization to obtain realistic optimal Control Strategies”, presented to the SPE 142043 Reservoir Simulation Symposium held in The Woodlands, Texas, USA, pp. 21-23 February 2011.
. Moreno J.C., Bradley D., Gurpinar O., Richter P., Hussain A., Shammari M., and Garni S., “Optimized workflow for designing complex wells”, presented to the SPE 99999 Europec/EAGA conference and Exhibition held in Vienna, Austria, pp. 12-15, June 2006 .
. Meun P., Tondel P., Godhavn J.M., and Aamo O.M., “Optimization of Smart Well production through nonlinear model predictive control”, presented to the SPE.Conf and Exhibition held in Amsterdam , The Netherlands, pp. 25-27, February 2008.
. Al-Ghareeb Z.M., Horne R.N., Yuen B.B., and Shenawi S.H., “Proactive optimization of oil recovery in multilateral wells using real time production data”, presented to the SPE 124999 Annual Technical Conference and Exhibition held in New Orleans, USA, pp. 4-7, October 2009.
. Al-Ghareeb Z.M., Monitoring and control of Smart Wells, MSc Dissertation, Stanford University, 2009.
. Conejeros R., and Lenoach B., “Model-based optimal of dual completion wells”, Journal of Petroleum Science and Engineering Vol, 43, pp. 1-14, 2004.
. Anderson M.J., Whitcomb P.J., “DOE Simplified: practical tools for effective experimentation”, by Productivity, DX7 manual, 2000.
. Beielstein T.B., Chiarandini M., Paquete L., and Preuss M., Experimental Methods for the Analysis of Optimization Algorithms, Springer-Verlag Berlin Heidelberg, 2010.
. Montgomery D.C., Design and Analysis of Experiments, John Wiley & Sons, 2001.
. Roy R.K., A primer on the TAGUCHI method by van nostrand reinhold, 1990.
. Singh H., and Kumar P., “Optimizing multi-machining characteristics through Taguchi’s approach and utility concept”, J. Manufact. Technol. Manage, 17, pp. 255–274, 2006.
. Singh H., Kumar P., “Quality optimization of turned parts (En 24 steel) by Taguchi method”, Prod. J. 144, pp. 43–49, 2003.
. Aggarwal A., Singh H., Kumar P., Singh M., “Optimization power consumption for CNC turned parts using response surface methodology and Taguchi technique-A comparative analysis”, Materials Processing Technology 200, pp. 373-384, 2008.
. Myers R.H., and Montgomery D.C., Response Surface Methodology: Process and Product Optimization Using Designed Experiments, by John Wiley & Sons, 2002.
. Carley K.M., Natalia Y., Kamneva N.Y., and Reminga J., Response Surface Methodology, CASOS Technical Report, 2004.
. Mehrabani J.V., Noaparast M., Mousavi S.M., Dehghan R., and Ghorbani A., “Process optimization and modeling of sphalerite flotation from a low-grade Zn-Pb ore using response surface methodology” Sphalerite Purification Technology 72, pp. 242-249, 2010.