Physical and Numerical Modeling of the Effect of Gravel Pack Size on Sand Production in Oil Wells by Designing and Manufacturing Machine

Document Type : Research Paper

Authors

1 Department of Mining Engineering, South Tehran Branch, Islamic Azad University, Tehran

2 Department of Mining and metallurgy Engineering, Amirkabir University (Polytechnique), Tehran

3 Department of Mining Engineering, Tarbiat Modares University, Tehran

4 Department of Mining Engineering, Science and Research Branch, Islamic Azad University, Tehran

Abstract

 
This research discusses the effect of gravel pack size on sand production by designing and manufacturing machine and a numerical model for simulating sand and gravel pack production. Different rocks and fluids can be tested under different stresses to simulate sand and gravel pack using this machine and the numerical model. In this study, sand with certain aggregation, gravel in different sizes, and water were used to simulate production of sand and gravel pack. PFC3D was used to create a numerical model. Sand size between 0.22-1.1 mm and gravel sizes between 3.54.76 mm, 4.769 mm, 9-12.6 mm, and 12.6-16.8 mm were used in the numerical model and gravel sizes between 4.76 – 9 mm and between 9.25 -19 mm were used in the physical model. The results obtained from the modeling showed that in the numerical model with the gravel pack sizes between 3.5-4.76 mm, production of sand was minimal; in the physical model with the gravel pack sizes between 4.76-9 mm, sand production was less and output flow rate of the fluid was more. In addition, the results of the physical model showed that after putting gravel pack, fluid production rate decreased over time and reached a constant amount. Therefore, it may be proposed that size of gravel pack between 4.76-9 mm is more suitable as far as fluid production rate and sand production prohibition is concerned.
 

Keywords

References

[1]. Risnes R., Bratli R. K., and Horsrud P., “Sand stresses around a wellbore,” SPEJ, Vol. 22, No. 6, pp. 883-898, 1982.##
[2]. Asgian M. I., Cundall P. A, and Brady B. H. G., “Mechanical stability of propped hydraulic fractures: A numerical study,” Journal of Petroleum Technology, pp. 203-208, 1995.##
[3]. Philip A. and Charlez P. A., Rock Mechanics, Vol. 2, Petroleum Application, Editions Technip, Paris, 1997.##
[4]. Bratli R. K. and Risnes R., “Stability and failure of sand arches,” SPEJ, pp. 236-248, 1981.##
[5]. Morita N., Whitfill D. L., Fedde Ø. P., and Løvik T. H., “Parametric study of sand-production prediction: Analytical approach,” SPE Production Engineering, Vol. 4, pp. 25-33, 1989.##
[6]. Vaziri H. H., Xiao Y., Islam R., and Nouri A., “Numerical modeling of seepage-induced sand production in oil and gas reservoirs,” Journal of Petroleum Science and Engineering, Vol. 36, pp. 71-86, 2002, .##
[7]. Vardoulakis I., Stavropoulou M., and Papanastasiou P., “Hydro-mechanical aspects of the sand production problem,” Transport in Porous Media, Vol. 22, pp. 225-244, 1996.##
[8]. Economides M. J., Watters L.T., and Dunn-Norman S., “Petroleum Well Construction,” John Wiley & Sons Ltd, 1998.##
[9]. Palmer I. D., McLennan J. D., and Vaziri H. H., “Cavity-like completions in weaksands,” SPE 58719, Proceedings of International Symposium on Formation Damage Control, Lafayette, Louisiana, U.S.A, 2000.##
[10]. Van Den Hoek P. J., Hertogh G. M. M., Kooijman A. P., de Bree Ph., Kenter C. J., and Papamichos E., Dec. “A new concept of sand production prediction: theory and laboratory experiments,” SPE Drilling and Completion, Vol. 15, No. 4, pp. 261-273, 2000.##
[11]. Vaziri H. H., Palmer I. D., McLennan L. and Islam R., “How can sand production yield a several-fold increase in productivity,” Experimental and Field Data, 2000.##
[12]. Palmer I., Vaziri H., willson S., Moschovidis Z., Cameron J. and Ispas I., “Predicting and managing sand production: a new strategy”, SPE Annual Technical Conference and Exhibition, Denver, Colorado, U.S.A., Oct. 5-8, 2003.##
[13]. Cundall P. A., “A computer model for simulating progressive large scale movement in blocky rock systems,” in Proceedings of the Symposium International Society of Rock Mechanics, 1971.##
[14]. O’Connor R. M., Torczynski J. R., Preece D. S., Klosek J. T., and Williams J. R., “Discrete element modeling of sand production,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, Vol. 34, No. 3-4, pp. 231.e1–231.e15, 1997.##
[15] Jensen R. P. and Preece D. S., “Modeling of Sand Production with Darcy’s Flow Coupled with Discrete Elements,” OSTI, 2000.##
[16]. Papamichos L., Li E., and Cerasi P., “Investigation of sand production mechanisms using DEM with fluid flow,” In Proceedings of the International Symposium of the International Society for Rock Mechanics (Eurock ’06), pp. 241–247, Liège, Belgium, May 2006.##
[17]. Cheung L. Y. G., “Micromechanics of Sand Production in Oil Wells,” Ph.D. Thesis, Imperial College of London, 2010.##
[18]. Zhou Z. Y., Yu A. B., and Choi S. K., “Numerical simulation of the liquid-induced erosion in a weakly bonded sand assembly,” Powder Technology, Vol. 211, No. 2-3, pp. 237–249, 2011.##
[19]. Tremblay B., Sedgwick G., and Forshner K., “Imaging of sand production in a horizontal sand pack by X-ray computed tomography,” SPE formation Evaluation, pp. 94-98, 1996.##
Journal of Petroleum Research
Volume 26, 95-2 - Serial Number 87
July and August 2016
Pages 96-106

Files

Share

How to cite

Statistics