[1]. Ghasabehi M, Shams M, Kanani H (2021) Multi-objective optimization of operating conditions of an enhanced parallel flow field proton exchange membrane fuel cell, Energy Conversion and Management, 230: 113798.##
[2]. Ashrafi M, Shams M, Bozorgnezhad A, Ahmadi G (2016) Simulation and experimental validation of droplet dynamics in microchannels of PEM fuel cells, Heat and Mass Transfer, 52, 12: 2671–2686. ##
[3]. Bao Z, Niu Z, Jiao K (2019) Numerical simulation for metal foam two-phase flow field of proton exchange membrane fuel cell, International Journal of Hydrogen Energy, 44, 12: 6229–6244. ##
[4]. Kalantari H (2018) Numerical analysis of water distribution in the various layers of proton exchange membrane fuel cells, Computers and Chemical Engineering, 118: 14–24. ##
[5]. Heidary H, Kermani M J, Dabir B (2016) Influences of bipolar plate channel blockages on PEM fuel cell performances, Energy Conversion and Management, 124: 51–60. ##
[6]. Fan L, Niu Z, Zhang G, Jiao K (2018) Optimization design of the cathode flow channel for proton exchange membrane fuel cells, Energy Conversion and Management, 171: 1813–1821. ##
[7]. Afshari E, Ziaei-Rad M (2018) A study on performance of cooling flow field with trapezoid-shape channels in pem fuel cell, 16th International Conference on Clean Energy. ##
[8]. Duy V N, Lee J, Kim K, Ahn J, Park S, Kim T, Kim H M (2015) Dynamic simulations of under-rib convection-driven flow-field configurations and comparison with experiment in polymer electrolyte membrane fuel cells, Journal of Power Sources, 293: 447–457. ##
[9]. Avcioglu G S, Ficicilar B, Eroglu I (2018) Effective factors improving catalyst layers of PEM fuel cell, international Journal of Hydrogen Energy, 43, 23: 10779–10797. ##
[10]. Ebrahimi S, Roshandel R, Vijayaraghavan K (2016) Power density optimization of PEMFC cathode with non-uniform catalyst layer by Simplex method and numerical simulation, International Journal of Hydrogen Energy, 41, 47: 22260–22273. ##
[11]. Kahveci E E, Taymaz I (2018) Assessment of single-serpentine PEM fuel cell model developed by computational fluid dynamics, Fuel, 217: 51–58. ##
[12]. Qin Y, Du Q Du, Fan M, Chang Y, Yin Y (2017) Study on the operating pressure effect on the performance of a proton exchange membrane fuel cell power system, Energy Conversion and Management, 142: 357–365. ##
[13]. Wang L, Husar A, Zhou T, Liu H (2003) A parametric study of PEM fuel cell performances, International Journal of Hydrogen Energy, 28, 11: 1263–1272. ##
[14]. Jawrungrit C, Sirivat A, Siemanond K (2016) Improving proton exchange membrane efficiency of fuel cell by numerical simulation and optimization, Computer Aided Chemical Engineering, 38: 1887–1892. ##
[15]. Toghyani S, Moradi Nafchi F, Afshari E, Hasanpour K, Baniasadi E, Atyabi S A (2018) Thermal and electrochemical performance analysis of a proton exchange membrane fuel cell under assembly pressure on gas diffusion layer, International Journal of Hydrogen Energy, 43, 9: 4534–4545. ##
[16]. Wu H W, Shih G J, Bin Chen Y (2018) Effect of operational parameters on transport and performance of a PEM fuel cell with the best protrusive gas diffusion layer arrangement, Applied Energy, 220: 47–58. ##
[17]. Yang W J, Wang H Y, Lee D H, Kim Y B (2015) Channel geometry optimization of a polymer electrolyte membrane fuel cell using genetic algorithm, Applied Energy, 146: 1–10. ##
[18]. Wang X D, Yan W M, Duan Y Y, Weng F B, Bin Jung G, Lee C Y (2010) Numerical study on channel size effect for proton exchange membrane fuel cell with serpentine flow field, Energy Conversion and Management, 51, 5: 959–968. ##
[19]. Sala P, Stampino P G, Dotelli G (2014) Design approach for the development of the flow field of bipolar plates for a pemfc stack prototype, Journal of Fuel Cell Science and Technology, 11, 6: 061003. ##
[20]. Mahmoudimehr J, Daryadel A (2017) Influences of feeding conditions and objective function on the optimal design of gas flow channel of a PEM fuel cell, International Journal of Hydrogen Energy, 42, 36: 23141–23159. ##
[21]. Arvay A (2011) Proton exchange membrane fuel cell modeling and simulation using ansys fluent, Arizona State University.
[22]. Ghasabehi M, Ashrafi M, Shams M (2021) Performance analysis of an innovative parallel flow field design of proton exchange membrane fuel cells using multiphysics simulation, Fuel, 285: 119194. ##
[23]. Pei P, Chen H (2014) Main factors affecting the lifetime of proton exchange membrane fuel cells in vehicle applications: a review, Applied Energy, 125: 60–75. ##
[24]. Ouaidat G, Cherouat A, Kouta R, Chamoret D (2020) Numerical modeling of the mechanical behavior of proton exchange membrane fuel cell performance: Design of experiment study and optimization, International Journal of Hydrogen Energy, 45, 46: 25210-25226. ##
[25]. Rakhshanpouri S, Rowshanzamir S (2013) Water transport through a PEM (proton exchange membrane) fuel cell in a seven-layer model, Energy, 50: 220–231. ##
[26]. Um S, Wang C Y (2005) Computational study of water transport in proton exchange membrane fuel cells, Journal of Power Sources, 156, 2: 211–223. ##
[27]. Chowdhury M Z, Genc O, Toros S (2018) Numerical optimization of channel to land width ratio for PEM fuel cell, International Journal of Hydrogen Energy. ##
[28]. Zhang X, Higier A, Zhang X, Liu H (2019) Experimental Studies of Effect of Land Width in PEM Fuel Cells with Serpentine Flow Field and Carbon Cloth, Energies, 12, 3: 471. ##
[29]. Carcadea E, Varlam M, Ingham D B, Ismail M S, Patularu L, Marinoiu A, Schitea D (2018) The effects of cathode flow channel size and operating conditions on PEM fuel performance: A CFD modelling study and experimental demonstration, International Journal of Energy Research, 42, 8: 2789–2804. ##
)
