Premature Fractures of the Pump Shaft of a Refinery Wastewater Unit Due to Biological Corrosion and Corrosion Fatigue

Abstract

Key Words





The pump shaft of a wastewater unit experienced three failures during nine-month service. The conditions of exposed wastewater and characteristics of the failed shafts were investigated. The results showed sufficient opportunity was provided for SRB microorganisms to effectively activate on the shaft surface in water-stagnant areas despite performing chemical and biological treatments on the wastewater. SRBs induced deep pits with tunneling-like structure, which created favorable conditions for stress concentration and initiation of corrosion fatigue. The morphological and characteristic features of related crack propagation on the fracture surface have been discussed.
 

Keywords

References

[1] Fractography, ASM Handbook, Vol. 12, 9th Edition, ASM, 1987.
[2] M.H. Harvey, The Nalco Guide to Cooling Water System Failure Analysis, 1993.
[3] Corrosion, ASM Handbook, Vol. 13, 9th Edition, ASM, 1987.
[4] A.E. Khlefa (Editor), Handbook of Case Histories in Failure Analysis, Vol. 2, ASM, 1993.
[5] Failure Analysis and Prevention, ASM Handbook, Vol. 11, 9 th Edition, ASM, 2002.
[6] G. Mohebali and A. Keitash, SRBs Detection Kit, Iranian Patent No. 30099, 2004.
[7] G. Kobrin, Microbiologically Influenced Corrosion, NACE, 1993.
[8] B.J. Little, P.A. Wagner and F. Mansfeld, Microbiologically Influenced Corrosion, NACE, 1997.
 
Journal of Petroleum Research
Volume 16, Issue 54 - Serial Number 54
November and December 2006
Pages 65-75

Files

Share

How to cite

Statistics