[1] R.C.John, “ Exploitation of Data of Alloy Corrosion in High-Temperature Gases”,
Materials Science Forum Vols 369-372(2001) PP 881-922
[2] G. Y. Lai, “Sulfidation Resistance of Various High-Temperature Alloys in Low Oxygen
Potential Atmospheres”, High Temperature Corrosion in Energy Systems.
[3] V.K.Sikka et al . , “ Iron-Aluminum Alloys Having High Room-Temperature and Method
for making Same , US Patent 5238645,1993
[4] Edited by N.S. Stoloff & V.K.Sikka,”Physical metallurgy and Processings of Intemetallic
Compounds, 1996.
[5] I. Baker & P. Nagpal , “ A Review of the flow and fracture of FeAl “,Procedings of the
First International Symposium on Structural Intermetallics , TMS, 1993.
[6] Edited by J.R.Davis, “Heat-Resistant Materials”, ASM Specialty Handbook, 1997.
[7] V.K. Sikka, S. Viswanathan and C.G. Mckamey, “Development and Commercialization
Status of Fe3Al- Based Intermetallic Alloys, Proceedings of the First International
Symposium on Structural Intermetallics, TMS, 1993.
[8] Krishna Vedula , “ Fe Al and Fe3Al”, Intermetallic Structureal Applications of termetallic
Compounds , Chapter 9, John wiley & sons, LTD, 2000.
[9] C.G. Mckamey & P.J. Maziaz , “ Heat Treatment Effects for Improved Creep – Rupture
Resistance of a Fe3Al- Based Alloy”, Intermetallics 6(1998) 303-314
[10] G. H. Meier and F. S. Pettit, “ Sulfidation and Hot Corrosion of Alloys at Elevated
Temperatures”, High Temperature Corrosion in Energy Systems,
[11] F.H. Stott et al. “ Preoxidation for the Protection of High-Temperature Alloys in
Environments of High Sulphur and Low Oxygen Potentials Pertinent to
Gasification Processes “, High Temperature Corrosion in Energy Systems,
[12] P. F. Tortorelli and J. H. Devan, “Behavior of Iron aluminides in Oxidizing and
Oxidizing / Sulfidizing Environments “, Materials Science and Engineering , A153
(1992) 573-577
[13] P.F. Tortorelli & K. Natesan, “ Critical Factors affecting the High-Temperature
Corrosion Performance of Iron Aluminides “, Materials Science and Engineering A
258(1998) 115-125
[14] T. T. Huang et al . , “High Temperature Oxidation of Fe-18Cr-6 Al Alloy in
H2/H2O/H2S Gaseous Environments “, High Temperature Corrosion in Energy Systems,
[15] B. A. Pint & P. F. Tortorelli, “ Long- term Oxidation Performance of Ingot-Produced
Fe3Al Alloys “, Oak Ridge National Laboratory, USA, 1999
[16] S. W. Green and F.H. Stott, “ The Effectiveness of Aluminizing in Protecting Iron-
Base Alloys in Sulphidizing Gases at High Temperature” , Oxidation of Metas, Vol. 36,
NOS. ¾ 1991
[17] B. A. Pint & P. F. Tortorelli & Y. Zhang, “ Evaluation of Iron – Aluminide CVD
Coatings for High Temperature Corrosion Protection”, Metals an Ceramics Division ,
Oak Ridge National Laboratory , USA, 2001
[18] Benno Ganser et al.,“ Operational Experience with Diffusion Coatings on Steam Cracker
Tubes”, Presented at the European Federation of Corrosion Workshop Coking and
Decoking , May 1999, Porto , Portugal .
[19] N.J. Simms, J.R. Nicholls and J.E. Oakey, Meterials Performance in Solid Fuel
Gasification System, Materials Science forum Vols 369-372(2001), PP 947-954
[20] P. F. Tortorelli et al. , “Oxide Defects and Damage Processes in Iron- Based Alumina-
Formers. “ , Materials Science Forum Vols 369-372(2001) PP 337-344
[21] H. J. Grabke , “ Mechanisms and Prevention of Corrosion in Carbonaceus Gases “ ,
Materials Science Forum Vols 369-372 (2001) PP 101-108
[22] F.J. Perez et al. , “Cyclic Oxidation Performance of a CVD-FBR Aluminised 18 Cr-8Ni
Stainless Steel”, Materials Science Forum Vols 369-372(2001) PP 751-758
[23] S. Osgerby et al. ,” Cracking and Spallation of Chromia and Alumina Scales during
Thermal Cycling “, Materials Science forum Vols 369-372(2001) PP 491-498
[24] B. A. Pint et al. ,”Optimizing the Imperfect Oxidation Performance of Iran Aluminides “,
Materials Science Forum Vols 369-372(2001) PP 411-418
[25] Caminha et al. ,” Effect of Alumimium Thermal Spray Coating on the Corrosion
Resistance of a Steel Under Oxidant Atmosphere in a Flaid Catalytic Cracking
Regenerator “, Materials Science Forum Vols 369-372(2001) PP 655-662
[26] S. W. Banovic & J. N. Dupont, “ Experimental Evaluation of Fe-Al Claddings in High –
Temperature Sulfidizing Environments”, Supplement to the Welding Journal, march 2001
[27] J. M. Cairney & P. R. Munroe, “ The effect of chromium on the B2-DO3
transformation in Fe3 Al”, Journal of Materials Science Letters 18 (1999) 449-452
[28] S. W Banovic & A. R. Marder, “ Corrosion Behavior of Weldable Fe-Al Alloys in
Oxidizing – Sulfidizing Enviromments” , Energy Research Center, Lehigh University,
USA, 2000
[29] Y. Zhang & B.A. Pint, “ Aluminide Coating for Power Generation Applications “,
Tennesse Technological University, USA, 2002
[30] V. Shankar Rao & V.S. Raga , “ Long-Term Sulfidation Behavior of Fe3Al - Fe3Al C
0.69 Iron Aluminides “, Intermetallics 11(2003) 119-128
)