[1]. Jebraieli Jolodar A., Akbarnejad M. M., Taghizadeh M., Ahmadi Marvast M. “Laser-based flow measurement in performance assessment of FCC atomizer,” Chemical Engineering Journal. 108, pp. 109–115, Jan. 2005.##
[2]. Jose Joaquim de Souza E. and Medina Dubois A., “Cost effective evaluation techniques for FCC atomizing nozzles,” Journal of Science, University of Sul-PR, Brazil, 83900-00.##
[3]. Reitz R. and Bracco F., “On the dependence of spray angle and other spray parameters on nozzle design and operating conditions,” SAE Technical Paper 790494, 1979, DOI. 10.4271/790494.##
[4]. Clint Hoffmann W., “Designing technology to minimize environmental,” Part of Crop Production, Agricultural Research, September 2010.##
[5]. Hoyt J. W. and Taylor J. J., “Flow at exit of an electrically-heated water nozzle discharging in air,” Naval Undersea Center San Diego, USA,1976.##
[6]. Kim H. H., Ogata A. and Kim J. H., “High speed camera observation of electrospray,” National Institute of Advanced Industrial Science and Technology, Japan, 2009.##
[7]. Chiu Fung M., Inthavong K., Yang 2 W. and Tu J., “External characteristics of spray atomisation from a nasal spray device, school of aerospace,” Mechanical and Manufacturing Engineering, RMIT University, Australia, December 2009.##
[8]. Gandhi A. H., Meinhart M. A., “A comparison of cone angle measurement techniques for the fuel spray from a port fuel injector,” Ford Motor Co, USA, 2009.##
[9]. Gan H., Raghunandan B. N., “A morphological technique for direct drop size measurement of cryogenic sprays,” Research Scholar, Indian Institute of Science, India, 2005.##
[10]. Jiang Y., Young Jeon H., Tian L., Loren E. Bode, “Measuring particle size distribution using led-Illumination,” University of Illinois at Urbana-Champaign, USA, 2009.##
[11]. دانشجو م. ا.، عباس‌پور فرد م. ح.، آق‌خانی م. ح. و آرین م.، "طراحی و ارزیابی نرم‌افزار مناسب سنجش تراکم و اندازه قطرات سم در سمپاش‌ها"، دانشگاه فردوسی مشهد، مجله حفاظت گیاهان، علوم و صنایع کشاورزی، جلد 22 ، شماره 2، سال 1387.##
[12]. عبدالکریمی و.، مدل‌سازی CFD جریان سه فازی گاز، ذرات جامد، قطرات مایع داخل بستر سیال، پایان‌نامه کارشناسی‌ارشد در مهندسی شیمی، دانشگاه سمنان، 1388.##
)
