[1]. Robert N. Brady and John F., “Dagel, diesel engine and fuel system repair,” 5th ed, Prentice Hall, 2001.##
[2]. Ed May, “Diesel mechanics”, McGraw-Hill Australia, 1985.##
[3]. Hansen A. C., Zhang Q. and Lyne P. W. L., ‘Ethanol-diesel fuel blends-a review, Bioresource,’ Technol., Vol. 96, pp. 277-285, 2005.##
[4]. De Menezes E. W., Da Silva R., Cataluna R. and Ortega R. J. C., “Effect of ethers and ether/ethanol additives on the physicochemical properties of diesel fuel and on engine tests”, Fuel, Vol. 85, pp. 815-822, 2006.##
[5]. Ribeiro N. M., Pinto A. C., Quintella C. M., Da Rocha G. O., Leonardo S. G., Lílian T., Guarieiro L. N., do Carmo Rangel M., Márcia C. C. Veloso , Michelle J. C. Rezende, Rosenira Serpa da Cruz, Ana Maria de Oliveira, Ednildo A. Torres , and Jailson B. de Andrade, “The role of additives for diesel and diesel blended (ethanol or biodiesel) fuels- a review”, Energy Fuels, Vol. 21, pp. 2433-2445, 2007. ##
[6]. Frusteri F., Spadaro L., Beatrice C. and Guido C., “Oxygenated additives production for diesel engine emission improvement”, Chem. Eng., Vol. 134, pp. 239-245, 2007.##
[7]. Yao M., Wang H., Zheng Z. and Yue Y., “Experimental study of n-butanol additive and multi-injection on HD diesel engine performance and emissions”, Fuel, Vol. 89, pp. 2191-2201, 2010.##
[8]. Mohebbi A., Komarizade M. A., Jafarmadar S. and Pashai J., “Use of waste cooking oil biodiesel in a tractor DI diesel engine”, J. Food Agric. Inviron., Vol. 10, pp. 1290-1297, 2012.##
[9]. غفارزاده س.، عباسی پ. و جعفری قاسم قشلاقی م.، "بررسی تئوری و تجربی تاثیر قطر لوله سوخت فشاربالای انژکتور در عملکرد و آلایندگی موتورهای دیزلی"، مجله دانشکده فنی دانشگاه تبریز، شماره 2، صفحات 73-79، 1387.##
[10]. Stage De Caro P., Mouloungui Z., Vaitilingom G. and Berge J. Ch., “Interest of combining an additive with diesel-ethanol blends for use in diesel engines”, Fuel, Vol. 80, pp. 565-574, 2001.##
[11]. Zannis T. C. and Hountalas D. T., “DI diesel engine performance and emissions from the oxygen enrichment of fuels with various aromatic content”, Energy Fuel, Vol. 18, pp. 659–666, 2004.##
[12]. Di Y., Cheung C. S. and Huang Z., “Experimental investigation of particulate emissions from a diesel engine fueled with ultralow-sulfur diesel fuel blended with diglyme”, Atmos. Environ., Vol. 44, pp. 55-63, 2010.##
[13]. Ren Y., Huang Z., Miao H., Di Y., Jiang D., Zeng K., Liu B. and Wang X., “Combustion and emissions of a DI diesel engine fuelled with diesel-oxygenate blends”, Fuel, Vol. 87, pp. 2691–2697, 2008. ##
[14]. Tamanouchi M., Akimoto T., Aihara S. and Morihisa H., “Effects of DGM and oxidation catalyst on diesel exhaust emissions”, SAE Techn., pp. 1122-1137, 1999. ##
[15]. Ren Y., Huang Z., Miao H., Jiang D., Zeng K., Liu B. and Wang X., “Effect of the addition of diglyme in diesel fuel on combustion and emissions in a compression-ignition engine”, Energy Fuels, Vol. 21, pp. 2573-2583, 2007.##
[16]. Zhang Q., Li W., Lin D.Ch., He N. and Duan Y., “Influence of nitromethane concentration on ignition energy and explosion parameters in gaseous nitromethane/air mixtures,” J. Hazard. Mater., Vol. 185, pp. 756-762, 2011.##
[17]. Guru M., Karakaya U., Altiparmak D. and Alicilar A., “Improvement of diesel fuel properties by using additives,” Energy Convers. Manage, Vol. 43, pp. 1021-1025, 2002.##
[18]. Sezar I., “Thermodynamic, performance and emission investigation of a diesel engine running on dimethyl ether and diethyl ether,” Int. J. Therm. Sci., Vol. 50, pp. 1594-1603, 2011.##
)
