[1]. Allan, J. R., & Wiggins, W. D., “Dolomite reservoirs: Geochemical techniques for evaluating origin and distribution,” No. 36. Amer. Assn. of Petroleum Geologists, 1993. ##
[2]. Singh T. N., Singh V. K., Monjezi M., and Kumar D., “Static and dynamic properties of rocks at sub-zero temperature,” Ind. Min. Engg. J, pp. 27-31, 1999. ##
[3]. Schön Jürgen H., “Physical properties of rocks: Fundamentals and principles of petrophysics,” Pergamum Oxford UK., 1996.
[4]. Nikrouz R., Moomivand H. and Azad R., “Effect of foliation orientation on the P-and S-wave velocity anisotropies and dynamic elastic constants of the quartz-micaschists metamorphic rocks, Angouran mine, Iran,” Arab. J. Geosci., Vol. 9, No.16, p. 669, 2016. ##
[5]. Eberhardt E., Stimpson B. and Stead D., “Effects of grain size on the initiation and propagation thresholds of stress-induced brittle fractures,” Rock Mech. Rock Eng. Vol. 32, No. 2, pp. 81-99, 1999. ##
[6]. Meng Z. and Pan J., “Correlation between petrographic characteristics and failure duration in clastic rocks,” Eng. Geol. Vol. 89, No. 3, pp. 258-265, 2007. ##
[7]. Sousa L. M., “The influence of the characteristics of quartz and mineral deterioration on the strength of granitic dimensional stones,” Environ. Earth. Sci. Vol. 69, No. 4, pp. 1333-1346, 2013. ##
[8]. Nicksiar M. and Martin C. D., “Crack initiation stress in low porosity crystalline and sedimentary rocks,” Eng. Geol. Vol. 154, pp. 64–76, 2013. ##
[9]. Ajalloeian R., Mansouri H. and Baradaran E., “Some carbonate rock texture effects on mechanical behavior, based on Koohrang tunnel data, Iran,” B. Eng. Geol. Environ. Vol. 76, No. 1, pp. 295-307, 2017. ##
[10]. حاجیان ج. و زاهدی م.، 1383. گزارش نقشه زمین‌شناسی زنجان، مقیاس 100000/1، سازمان زمین‌شناسی و اکتشافات معدنی کشور.
[11]. Hamdi B., “Stratigraphy and Paleontology of the Late Precambrian to Early Cambrian in the Alborz Mountains Northern Iran,” Geological Survey of Iran, 41 p., 1989. ##
[12]. زهدی ا.، عاصمی ف. و لکی‌روحانی ع.، "مدل دولومیتی‌شدن سازند سلطانیه در جنوب‌باختر زنجان،" فصلنامه علمی-پژوهشی علوم زمین، 26(104)، 28-17، 1396. ##
[13]. زهدی، ا.، مدل دولومیتی‌شدن سازند الیکا در منطقه زنجان، نوزدهمین همایش سالانه انجمن زمین‌شناسی ایران و نهمین همایش ملی زمین‌شناسی دانشگاه پیام نور، تهران، ایران، 1394. ##
[14]. Gregg J. M. and Sibley D. F., “Epigenetic dolomitization and the origin of xenotopic dolomite texture,” J. Sediment. Res. Vol. 54, No. 3, pp. 908-931, 1984. ##
[15]. Sibley D. F., and Gregg J. M., “Classification of dolomite rock textures,” J. Sediment. Res. Vol. 57, No. 6, pp. 967-975, 1987.
[16]. Mazzullo S. J., “Geochemical and neomorphic alteration of dolomite: a review,” Carbonate. Evaporite. Vol. 7, No. 1, pp. 21-37, 1992. ##
[17]. Dickson J. A. D., “A modified staining technique for carbonate in thin section,” Nature, Vol. 205, No. 4971, pp. 205-587, 1965.
[18]. Hatzor Y. H. and Palchik V., “The influence of grain size and porosity on crack initiation stress and critical flaw length in dolomites,” Int. J. Rock Mech. Min. Sci. Vol. 34, No. 5, pp. 805–816, 1997. ##
[19] Hidalgo K. P., and Nordlund E., “Comparison between stress and strain quantities of the failure–deformation process of Fennoscandian hard rocks using geological information,” Rock Mech. Rock Eng. Vol. 46, No. 1, pp. 41-51, 2013. ##
[20] Xue L., Qin S., Sun Q., Wang Y., Lee L. M. and Li W., “A study on crack damage stress thresholds of different rock types based on uniaxial compression tests,” Rock Mech. Rock Eng. Vol. 47, No. 4, pp. 1183-1195, 2014. ##
[21] Palchik V., and Hatzor Y. H., “Crack damage stress as a composite function of porosity and elastic matrix stiffness in dolomites and limestones,” Eng. Geol. Vol. 63, No. 3, pp. 233-245, 2002. ##
[22] Palchik V., “On the ratios between elastic modulus and uniaxial compressive strength of heterogeneous carbonate rocks,” Rock Mech. Rock Eng. Vol. 44, No. 1, pp. 121-128, 2011. ##
[23] Castagna .J.P., Batzle. M. L. and Eastwood R. L., “Relationship between compressional and shear wave velocities in silicate rocks,” Geophysics, Vol. 50, pp.571–581. prelimining verification and applications, Geophys. Prospect. Vol. 40, pp. 195–209, 1985. ##
[24] Pickett G. R., “Acoustic Character Logs and their Application in Formation Evaluation,” J. Petrol. Technol. Vol. 15, pp. 650-667, 1963. ##
[25] Hudson J. A., Harrison J. F., “Engineering Rock Mechanics,” London, UK: Elsevier Science Ltd, p. 457, 2000. ##
)
