[1]. Kumar A. and Savari S., “Lost circulation control and wellbore strengthening looking beyond particle size distribution,” In AADE National Technical Conference and Exhibition, Houston, Texas, USA, pp. 12-14. 2011. ##
[2]. Yongcun F., Jones J. F. and Gray K. E., “A Review on Fracture-Initiation and-Propagation Pressures for Lost Circulation and Wellbore Strengthening,” SPE Drilling & Completion 31, No. 02, pp. 134-144, 2016. ##
[3]. Power D., Ivan C. D. and Brooks' S. W., “The top 10 lost circulation concerns in deep water drilling,” SPE 81133,Latin America and Caribbean Petroleum Engineering,Port-of-Spain, Trinidad, April 27-30, 2003.##
[4]. Nayberg T. M., “Laboratory study of lost circulation materials for use in both oil-based and water-based drilling muds,” SPE Drilling Engineering 2, No. 03, pp. 229-236, 1987.##
[5]. Arunesh Kumar S. Sh., Whitfill D. L. and Eugene Jamison D., “Improved lost circulation treatment design and testing techniques minimizes formation damage,” In SPE European Formation Damage Conference, Society of Petroleum Engineers, 7-10 June 2011. ##
[6]. Nasiri A. R., Ghaffarkhah A., Keshavarz Moraveji M., Gharbanian A. and Valizadeh M., “Experimental and field test analysis of different loss control materials for combating lost circulation in bentonite mud,” Journal of Natural Gas Science and Engineering, Vol. 44, pp. 1-8, 2017.##
[7]. Corley Wallace T. and Dorsey D. L., “Lost circulation material,” U.S. Patent 4,422,948, issued December 27, 1983.##
[8]. Lummus J. L. and Randall B. V., “Lost circulation material,” U. S. Patent 3,375,888, issued April 2, 1968.##
[9]. Goud M. Ch. and Joseph G., “Drilling fluid additives and engineering to improve formation integrity,” In SPE/IADC Indian Drilling Technology Conference and Exhibition, Society of Petroleum Engineers, 2006. ##
[10]. Mokhtari M. and Ozbayoglu E. M., “Laboratory investigation on gelatin behavior of Xanthan cross-linked with Borate intended to combat lost circulation,” Society of Petroleum Engineers, SPE 136094, 2010. ##
[11]. Dick M. A., Heinz T. J., Svoboda C. F. and Aston M., “Optimizing the selection of bridging particles for reservoir drilling fluids,” In SPE International Symposium on Formation Damage Control, Society of Petroleum Engineers, 2000.##
[12]. Stephen V., Cowie M., Jones T. and Twynam A. J., “A new methodology that surpasses current bridging theories to efficiently seal a varied pore throat distribution as found in natural reservoir formations,” Wiertnictwo, Nafta, Gaz 23, No. 1, pp. 501-515, 2006.##
[13]. Chengyuan X., Kang Y., Chen F. and You Zh., “Analytical model of plugging zone strength for drill-in fluid loss control and formation damage prevention in fractured tight reservoir,” Journal of Petroleum Science and Engineering, Vol. 149, pp. 686-700, 20 Jan. 2017.##
[14]. Mortadha A., Al Dushaishi Mohammed F., Nygaard R., Nes O. M. and Saasen A., “Updated criterion to select particle size distribution of lost circulation materials for an effective fracture sealing,” Journal of Petroleum Science and Engineering, Vol. 149, pp. 641-648, 2017.##
[15]. Stene C. K. and Cremeans J. G., “Lost circulation material and method of use,” U.S. Patent 6,630,429, issued October 7, 2003. ##
[16]. MacQuoid M. and Skodack D., “Method for using coconut coir as a lost circulation material for well drilling,” U.S. Patent Application 10/626,503, 2003.##
[17]. Matsui H., Daitoh M., Yoshimora K. and Morita N., “Development of environmentally friendly lost circulation materials for riserless drilling,” SPE 156575, 2012. ##
[18]. Amanullah M. D., Ramasamy J. and Al-Arfaj M. K., “Application of an indigenous eco-friendly raw material as fluid loss,” Journal of Petroleum Science and Engineering, No. 139, pp. 191–197, 2016. ##
)
