[1]. Liu P., Rodriguez J. A., Asakura T., Gomes J. and Nakamura K. “Desulfurization reactions on Ni2P(001) and α-Mo2C(001) surfaces: complex role of P and C sites,” J. Phys. Chem. B., Vol. 109, No.10, pp.4575-4583, 2005. ##
[2]. Mc Kinley S. G. and Angelici R. J. “Deep desulfurization by selective adsorption of dibenzothiophenes on Ag+/SBA-15 and Ag+/SiO2,” Chem. Comm., Vol. 20, pp. 2620-2621, 2003. ##
[3]. Wang F., Zhang Z., Yang J., Wang L., Lin Y. and Wei Y., “Immobilization of room temperature ionic liquid (RTIL) on silica gel for adsorption removal of thiophenic sulfur compounds from fuel,” Fuel, Vol. 107, pp. 394-399, 2013. ##
[4]. Ninh T. K. T., Laurenti D., Leclerc E. and Vrinat M., “Support effect for CoMoS and CoNiMoS hydrodesulfurization catalysts prepared by controlled method,” Appl. Catal., A, Vol. 487, pp. 210-218, 2014. ##
[5]. Trejo F., Rana M. S., Ancheyta J. and Chávez S. “Influence of support and supported phases on catalytic functionalities of hydrotreating catalysts,” Fuel, Vol. 138, pp.104-110, 2014. ##
[6]. Trejo F., Rana M. S., Ancheyta J. and Rueda A., “Hydrotreating catalysts on different supports and its acid–base properties,” Fuel, Vol.100, pp.163-172, 2012. ##
[7]. Shi Y., Zhang X. and Liu G. “Activated carbons derived from hydrothermally carbonized sucrose: remarkable adsorbents for adsorptive desulfurization,” ACS Sustainable Chemistry & Engineering, Vol. 3, No. 9, pp. 2237-2246, 2015. ##
[8]. Xiong J., Zhu W., Li H., Ding W., Chao Y., Wu P, Xun S., Zhang M. and Li H., “Few-layered graphene-like boron nitride induced a re markable adsorption capacity for dibenzothiophene in fuels,” Green Chemistry Journal, Vol.17, Issue 3, pp.1647-1656, 2015. ##
[9]. Jiang W., Zhu W., Li H., Wang X., Yin S., Chang Y. and L. Huaming, “Temperature-responsive ionic liquid ex traction and separation of the aromatic sulfur compounds,” Journal of Fuel, Vol. 140, pp. 590-596, 2015. ##
[10]. Balinge K. R., Khiratkar A. G., Krishnamurthy M., Patle D. S., K CK and Bhagat P. R. “Deep-desulfurization of the petroleum diesel using the heterogeneous carboxyl functionalized poly-ionic liquid,” Resource-Efficient Technologies, Vol. 2, Supplement 1, pp. S105-S113, 2015. ##
[11]. Kwak C., Lee J. J., Bae J. S., Choi K. and Moon SH. “Hydrodesulfurization of DBT, 4-MDBT, and 4,6-DMDBT on fluorinated CoMoS/Al2O3 catalysts,” Applied Catalysis A: General, Vol.200, No, 1-2, pp. 233-242, 2000. ##
[12]. Ma X., Sakanishi K. and Mochida I. “Hydrodesulfurization reactivities of various sulfur compounds in diesel fuel,” Industrial and engineering chemistry research, Vol. 33, No. 2, pp. 218-222, 1994. ##
[13]. Otsuki S., Nonaka T., Takashima N., Qian W., Ishihara A., Imai T. and Kabe T., “Oxidative desulfurization of light gas oil and vacuum gas oil by oxidation and solvent extraction,” Energy and Fuels, Vol. 14, No. 6, pp. 1232-1239, 2000. ##
[14]. Qiu L., Cheng Y., Yang C., Zeng G., Long Z., Wei S., Zhaoa K. and Luoa L., “Oxidative desulfurization of dibenzothiophene using a catalyst of molybdenum supported on modified medicinal stone,” Rsc Advances, Vol. 6, No. 21, pp. 1736-1745, 2016. ##
[15]. Qian E. W., “Development of novel nonhydrogenation desulfurization process & mdash; oxidative desulfurization of distillate and mdash,” Journal of the Japan Petroleum Institute, Vol. 51, No.1, pp. 14-31, 2008. ##
[16]. Yang C., Zhao K., Cheng Y., Zeng G., Zhang M., Shao J. and Lu L., “Catalytic oxidative desulfurization of BT and DBT from n-octane using cyclohexanone peroxide and catalyst of molybdenum supported on 4A molecular sieve,” Separation and Purification Technology, Vol. 163, pp. 153-161, 2016. ##
[17]. Bradley S. A., Broach R. W., Mezza T. M., Prabhakar S. and Sinkler W. “Zeolite characterization. zeolites in industrial separation and catalysis,” Wiley-VCH Verlag GmbH and Co. KGaA, pp. 85-171, 2010. ##
[18]. Elaiopoulos K., Perraki T. and Grigoropoulou E., “Mineralogical study and porosimetry measurements of zeolites from Scaloma area, Thrace, Greece,” Microporous and Mesoporous Materials, Vol. 112, No. 1-3, pp. 441-449, 2008. ##
[19]. Elaiopoulos K., Perraki T. and Grigoropoulou E. “Monitoring the effect of hydrothermal treatments on the structure of a natural zeolite through a combined XRD, FTIR, XRF, SEM and N2-porosimetry analysis,” Microporous and Mesoporous Materials, Vol. 134, No. 1-3, pp. 29-43, 2010. ##
[20]. Ates A. “Role of modification of natural zeolite in removal of manganese from aqueous solutions,” Powder Technol., Vol. 2, No. 64, pp. 86-95, 2014. ##
[21]. Garcia-Basabe Y., Rodriguez-Iznaga I., de Menorval L. C., Llewellyn P., Maurin G., Lewis D. W., Binions R., Autie M. and Ruiz-Salvador A. R., “Step-wise dealumination of natural clinoptilolite: Structural and physicochemical characterization,” Microporous and Mesoporous Materials, Vol. 135, No.1-3, pp. 187-196, 2010. ##
[22]. Wei X, Smirniotis PG. “Development and characterization of mesoporosity in ZSM-12 by desilication,” Microporous and Mesoporous Materials, Vol. 97, No. 1-3, pp. 97-106, 2016. ##
[23]. Ates A. and Hardacre C., “The effect of various treatment conditions on natural zeolites: Ion exchange, acidic, thermal and steam treatments,” J. Colloid Interface Sci., Vol. 372, No. 1, pp. 130-40, 2012. ##
)
