[1]. Zhang F, Miska S, Yu M, Ozbayoglu E, Takach N, Osgouei R E (2015) Is well clean enough? a fast approach to estimate hole cleaning for directional drilling, SPE/ ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, Society of Petroleum Engineers, March, doi.org/10.2118/173681-MS. ##
[2]. Cayeux E, Leulseged A, Kluge R, Haga J (2016) Use of a transient cuttings transport model in the planning, monitoring and post analysis of complex drilling operations in the North Sea, IADC/SPE Drilling Conference and Exhibition, Society of Petroleum Engineers, March, doi.org/10.2118/178862-MS. ##
[3]. Han S M, Woo N S, Kim Y J (2016) A study of the particle transport in the non-newtonian fluid with inclined annulus, Asia-Pacific Journal of Modeling and Simulation for Mechanical System Design and Analysis, 1, 1: 23-28. ##
[4]. Ayeni O O, Wu C L, Nandakumar K, Joshi J B (2016) Development and validation of a new drag law using mechanical energy balance approach for DEM–CFD simulation of gas–solid fluidized bed, Chemical Engineering Journal, 302: 395-405, doi.org/10.1016/j.cej.2016.05.056. ##
[5]. Li J, Luft B (2014) Overview solids transport study and application in oil-gas industry-theoretical work, International Petroleum Technology Conference, doi.org/10.2523/IPTC-17832-MS. ##
[6]. Falcone G (2009) Flow loops for validating and testing multiphase flow meters, Developments in Petroleum Science, 54: 295-302, doi.org/10.1016/S0376-7361(09)05409-0. ##
[7]. Duan M, S M, Yu M, Takach N, Ahmed R, Zettner C (2007) Critical conditions for effective sand-sized solids transport in horizontal and high-angle wells, Paper Presented at the SPE 106707, Oklahoma, U.S.A., 24: 2, doi.org/10.2118/106707-PA. ##
[8]. Corredor F E R, Bizhani M, Kuru E (2016) Experimental investigation of cuttings bed erosion in horizontal wells using water and drag reducing fluids, Journal of Petroleum Science and Engineering, 147: 129-142, doi.org/10.1016/j.petrol.2016.05.013. ##
[9]. Egenti N B (2014) Understanding drill-cuttings transportation in deviated and horizontal wells, Paper presented at the SPE-172835-MS, Lagos, Nigeria, doi.org/10.2118/172835-MS. ##
[10]. Nazari T, Hareland G, Azar J J (2010) Review of cuttings transport in directional well drilling- systematic approach, Paper Presented at the SPE, Anaheim, California, U.S.A., doi.org/10.2118/132372-MS. ##
[11]. Bizhani M, Rodriguez-Corredor F E, Kuru E (2015) Hole cleaning performance of water vs. polymer-based fluids under turbulent flow conditions, Paper presented at the SPE, Alberta, Canada, doi.org/10.2118/174404-MS. ##
[12]. Baldino S, R E O, Ozbayoglu E, Miska S, Takach N, May R, Clapper D (2015) Cuttings settling and slip velocity evaluation in synthetic drilling fluids, Paper presented at the 12th Offshore Mediterranean Conference and Exhibition, Ravenna, Italy, ISBN: 0788894043648. ##
[13]. Valluri S G, Miska S Z, Yu M, Ahmed R M, Takach N (2007) Experimental study of effective hole cleaning using sweeps in horizontal wellbores, SPE Annual Technical Conference and Exhibition, Society of Petroleum Engineers, doi.org/10.2118/101220-MS. ##
[14]. Duan M S M, Yu M, Takach N, Ahmed R, Zettner C (2008) Transport of small cuttings in extended-reach drilling, Society of Petroleum Engineers, doi.org/10.2118/104192-MS. ##
[15]. ده‌ودار م، همایون م (1400) مهندسی حفاری، جلد یکم: سیال حفاری، انتشارات دانشگاه صنعتی امیرکبیر، تهران، 1-374، 9789644638299 :ISBN. ##
[16]. انوری، ح (1387) مدل‌سازی عددی انتقال کنده‌های حفاری به همراه مطالعه پارامتری عوامل موثر بر آن در یکی از میادین نفتی جنوب ایران؛ پایان نامه کارشناسی ارشد دانشگاه صنعتی امیرکبیر، 1-92. ##
[17]. ده‌ودار م، معارف‌وند، پ، فضائلی‌زاده م، مروجی کشاورز م (1396) مروری بر پارامترهای اثرگذار در مطالعات تجربی و دینامیک سیالات محاسباتی حمل کنده‌های حفاری در فضای دالیزی چاه، اکتشاف و تولید نفت و گاز، 145: 59-67. ##
[18]. Dehvedar M, Moarefvand P (2019) Detecting and drilling in critical inclination window in slant wells by means of a two-phase liquid-solid CFD model and experimental study, Kuwait Journal of Science, 46, 2: 74-84. ##
[19]. Dehvedar M, Moarefvand P, Kiyani A R (2019) A liquid–solid two-phase flow computational fluid dynamic modelling of the operational characteristic's effects on the cleaning time of a circulating flow loop, South African Journal of chemistry, 72: 67-79, dx.doi.org/10.17159/0379-4350/2019/v72a10. ##
[20]. Zeidler H Udo (1970) An experimental analysis of the transport of drilled particles, SPE 3064 presented at the SPE 45th Annual Meeting, Houston, 12, 01: 39–48, doi.org/10.2118/3064-PA. ##
[21]. Sifferman R T (1979) Drill cutting transport in full scale vertical annuli, SPE 4514 presented in the 48th Annual Fall Meeting of the Society of Petroleum Engineers held in Las Vegas, Nevada, 26, 11: 1295–1302, doi.org/10.2118/4514-PA. ##
[22]. Belavadi M N, Chukwu G A (1994) Experimental study of the parameters affecting cuttings transportation in a vertical wellbore annulus, SPE Western Regional Meeting, Long Beach, California, doi.org/10.2118/27880-MS. ##
[23]. Waker S, J Li (2000) The effect of particle size, fluid rheology, and pipe eccentricity on cutting transport, SPE 60755 Presented at the 2000 SPE, ICTA Coiled Tubing Roundtable held in Houston, TX, doi.org/10.2118/60755-MS. ##
[24]. Pigott R J S (1941) Mud Flow in Drilling”, Drilling and Production Practice, API. ##
[25]. Martin M (1987) Transport of cuttings in directional wells, paper SPE / IADC 16083 presented at the SPE / IADC Drilling Conference, New Orleans, Louisiana, doi.org/10.2118/16083-MS. ##
[26]. Seeberger M H, Matlock R W, Hanson P M (1989) Oil muds in large – diameter, highly deviated wells: solving the cuttings removal problems, paper SPE / IADC 18636 Presented at the SPE / IADC Drilling Conference, New Orleans, Lousiana, doi.org/10.2118/18635-MS. ##
[27]. Okranji S S, Azar J J (1985) Mud cutting transport in directional well drilling, paper SPE 14178 presented at the annual meeting in Las Vegas, Nevada, doi.org/10.2118/25871-MS. ##
[28]. Bilgesu H I (2002) Computational Fluid Dynamics (CFD) as a tool to study cutting transport in wellbores, SPE 78716 paper Eastern Regional Meeting, Society of Petroleum Engineers, doi.org/10.2118/78716-MS. ##
[29]. Byrne M T (2011) Computational fluid dynamics for reservoir and well fluid flow performance modelling, SPE European Formation Damage Conference. Society of Petroleum Engineers, doi.org/10.2118/144130-MS. ##
[30]. Akhshik S, Behzad M, Rajabi M (2016) CFD-DEM simulation of the hole cleaning process in a deviated well drilling: the effects of particle shape, Particuology, 25: 72-82, doi.org/10.1016/j.partic.2015.02.008. ##
[31]. Mme U, Skalle P (2012) CFD calculations of cuttings transport through drilling annuli at various angles, International Journal of Petroleum Science and Technology, 6: 129-141, ISSN 0973-6328. ##
[32]. Hajipour M (2020) CFD simulation of turbulent flow of drill cuttings and parametric studies in a horizontal annulus, SN Applied Sciences 2: 1-12. ##
[33]. مشعشعی س ح، ابراهیم‌آبادی آ، امامزاده ا (1397) ارائه ابزار گرافیکی به منظور پیش‌بینی نرخ نفوذ حفاری با استفاده از شبکههای هوشمند. پژوهش نفت، 28، (97-4), 125-112. ##
)