Sadeghbeigi, R., Fluid Catalytic Cracking Handbook, 1th Ed, Gulf Professional Publishing, 2000.
 Chen, Y.M., “Recent advances in FCC technology”, Powder Technology, Vol. 163, pp. 2–8, 2006.
 Kunni, D., & Levenspiel, O., Fluidization engineering, 2th Ed, Butterworth-Heinemann, 1990.
 Ranade, V.V., Computational flow modeling for chemical reactor engineering, 1th Ed, Academic press, 2002.
 Goldschmidt, M.J.V., Beetstra, R., & Kuipers, J.A.M., “Hydrodynamic modeling of dense gas-fluidized beds: comparison and validation of 3D discrete particle and continuum models”, Powder Technology, Vol. 142, No. 1, pp. 23– 47, 2004.
 Chiesa, M., Mathiesen, V., Melheim, J.A., & Halvorsen, B., “Numerical simulation of particulate flow by the Eulerian-Lagrangian and the Eulerian-Eulerian approach with application to a fluidized bed”, Computers and Chemical Engineering, Vol. 29, No. 2, pp. 291-304, 2005.
 Van der Hoef, M.A., Sint Annaland, M.V., & Kuipers, J.A.M., “Computational fluid dynamics for dense gas–solid fluidized beds: a multi-scale modeling strategy”, Chemical Engineering Science, Vol. 59, pp. 5157–5165, 2004.
 Yang, N., Wang, W., Ge, W., & Li, J., “CFD simulation of concurrent-up gas–solid flow in circulating fluidized beds with structure-dependent drag coefficient”, Chemical Engineering Journal, Vol. 96, pp. 71–80, 2003.
 Mathiesen, V., Solberg, T., & Hjertager, B.H., “Predictions of gas/particle flow with an Eulerian model including a realistic particle size distribution”, Powder Technology, Vol. 112, pp. 34–45, 2000.
 Hansen, K.G., Ibsen, C.H., Solberg, T., & Hjertager, B., “Eulerian/Eulerian CFD simulation of a cold flowing FCC Riser”, International Journal of Chemical Reactor Engineering, Vol. 1, pp. 1-15, 2003.
 McKeen, T., & Pugsley, T., “Simulation and experimental validation of a freely bubbling bed of FCC catalyst”, Powder Technology, Vol. 129, pp. 139–152, 2003.
 Behjat, Y., Shahhosseini, S., & Hashemabadi, S.H., “CFD modeling of hydrodynamic and heat transfer in fluidized bed reactors”, International Communications in Heat and Mass Transfer, Vol. 35, pp. 357–368, 2008.
 Zimmermann, S., & Taghipour, F., “CFD modeling of the hydrodynamics and reaction kinetics of FCC fluidized-bed reactors”, Ind. Eng. Chem. Res., Vol. 44, pp. 9818-9827, 2005.
 Benyahia, S., Arastoopour, H., Knowlton, T.M., & Massah, H., “Simulation of particles and gas flow behavior in the riser section of a circulating fluidized bed using the kinetic theory approach for the particulate phase”, Powder Technology, Vol. 112, pp. 24–33, 2000.
 Jiradilok, V., Gidaspow, D., Damronglerd, S., Koves, W.J., & Mostofi, R., “Kinetic theory based CFD simulation of turbulent fluidization of FCC particles in a riser”, Chemical Engineering Science, Vol. 61, pp. 5544 – 5559, 2006.
 Huilin, L., Gidaspow, D., Bouillard, J., & Wentie, L., “Hydrodynamic simulation of gas–solid flow in a riser using kinetic theory of granular flow”, Chemical Engineering Journal, Vol. 95, pp. 1-13, 2003.
 Gao, J., Xu, C., Lin, S., Yang, G., & Guo, Y., “Advanced model for turbulent gas–solid flow and reaction in FCC riser reactors”, AIChE Journal, Vol. 45, No. 5, pp. 1095-1113, 1999.
 Benyahia, S., Ortiz, A.G., & Paredes, J.I.P., “Numerical analysis of a reacting gas/solid flow in the riser section of an industrial fluid catalytic cracking unit”, International journal of chemical reactor engineering, Vol. 1, pp. 1-14, 2003.  Novia, N., Ray, M.S., & Pareek, V., “Three-dimensional hydrodynamics and reaction kinetics analysis in FCC riser reactors”, Chemical Product and Process Modeling, Vol. 2, No. 2, pp. 1-19, 2007.
 Chang, S.L., Lottes, S.A., Zhou, C.Q., Bowman, B.J., & Petrick, M., “Numerical study of spray injection effects on the heat transfer and product yields of FCC riser reactors”, Journal of Heat Transfer, Vol. 123, pp. 544-555, 2001.  Nayak, S.V., Joshi, S.L., & Ranade, V.V.,“ Modeling of vaporization and cracking of liquid oil injected in a gas–solid riser”, Chemical Engineering Science, Vol. 60, pp. 6049 – 6066, 2005.
 Patankar, S.V., Numerical heat transfer and fluid flow, McGraw-Hill, 1980.
- Versteeg, & H.K., Malalasekera, W., “An introduction to computational fluid dynamics”, The finite vol method, 1th Ed., Longman scientific & Technical, 1995.
 Yang, Y.L., Experimental and theoretical studies on hHydrodynamics in cocurrent upward and downward circulating fluidized beds, Ph.D. thesis, Tsinghua University, Beijing, China, 1991.
 Law, C.K., “Recent advances in droplet vaporization and combustion”, Prog. Energy Combust. Sci., Vol. 8, pp. 171-201, 1982.