[1]. Funke W., “Polymeric material for corrosion control,” American Chemical Society, Washington DC, pp. 211-222, 1986.##
[2]. Kalendova A., Snaparek J. and Kalenda P., “Nontoxic anticorrosion pigment of the spinel type compared with condensed phosphate,” Dye Pigment., Vol. 30, pp. 129-140, 1996.##
[3]. Forsgsen A., “Corrosion Control through organic coating,” CRC Press, pp. 123-189, 2006.##
[4]. Doren K.,Freitag W. and Stoye D., “Water–Borne coating the environmentally-friendly alternative,” Hanser/Gardner Publication, Cincinnati (USA), 1994.##
[5]. Laverde D., Zubillaga J., Gill-SevillanO. and Villanueva E., “The influence of the primer layer on mechanical damage and loss of corrosion protection of deformed painted Zn-0.16%Al and Zn-5%Al galvanazied sheet steel,” Corros. Sci., Vol. 37, pp. 79-95, 1995.##
[6]. Barraclouugh J. and Harrison J., “New Leadless Anticorrosive Primer,” J. Oil Color Chem. Assoc., Vol. 48, pp. 341-355, 1965.##
[7]. Sinko J., “Challenges of chromate inhibitor pigments replacement in organic coating,” Prog. Org. Coat., Vol. 42, pp. 267-282, 2001.##
[8]. Buxbaum G. and Pfaff G., “Industrial inorganic pigment,” Wiley-VCH,Weiheim, 2005.##
[9]. Hernandez M. and Genesca J., “Effect of an inhibitive pigment zincaluminium phosphate (ZAP) on the corrosion mechanisms of steel in waterborne coatings,” Prog.Org.Coat., Vol. 56, pp. 199-206, 2006.##
[10]. Naderi R., Arman S. Y. and Fouladvand Sh., “Investigation on the inhibition synergism of new generations of phosphate-based anticorrosion pigments,” Dye Pigment,Vol. 105, pp. 23-33, 2014.##
[11]. Naderi R. and Attar M. M., “Electrochemical study of protective behavior of organic coating pigmented with zinc aluminum polyphosphate as a modified zinc phosphate at different pigment volume concentrations,” Prog. Org. Coat., Vol. 66, pp.314–320, 2009.##
[12]. Naderi R. and Attar M. M., “The role of zinc aluminum phosphate anticorrosive pigment in protective performance and cathodic disbondment of epoxy coating,” Corros. Sci., Vol. 52, pp. 1291–1296, 2010.##
[13]. Naderi R., Mahdavian M. and Darvish A., “Electrochemical examining behavior of epoxy coating incorporating zinc-free phosphate-based anticorrosion pigment,” Prog. Org. Coat.,Vol. 76, pp. 302– 306, 2013.##
[14]. Mahdavian M. and Ashhari S., “Corrosion inhibition performance of 2-mercaptobenzimidazole and 2-mercaptobenzoxazole coumpound for protection of mild steel in hydrochloric acid solution,” Electrochim. Acta, Vol. 55, pp. 1720-1724, 2010.##
[15]. Alibakhshi E., Ghasemi E. and Mahdavian M., “Corrosion inhibition by lithium zinc phosphate pigment,” Corros. Sci., Vol. 77, pp. 222-229, 2013.##
[16]. Bentiss F., Jama C., Mernari B., El Attari H., El Kadi L., Lebrini M., Traisnel M. and Lagrenee M., “Corrosion control of mild steel using 3,5-bis(4-methoxyphenyl)4-amino-1,2,4- triazole in normal hydrochloric acid medium,” Corros. Sci.,Vol. 51, p. 1628, 2009.##
[17]. Amirudin A., Barreau C., Hellouin R. and Thierry D., “Evaluation of anti corrosive pigment by pigment extract studies,atmospheric exposure and electrochemical impedance spectroscopy,” Prog.Org.Coat., Vol. 25, pp. 339-355, 1995.##
[18]. Turgoose S., Scantlebury D. and Kending M., “Proceedings of Symposium on Advance in Corrosion and Protection of Organic Coating,” The electrochemical Society, Penington, NJ, p. 468, 1989.##
[19]. Rammelt U. and Rainhard G., “Characterization of active pigments in damage of organic coatings on steel by means of electrochemical impedance spectroscopy,” Prog. Org. Coat., Vol. 24, pp. 309-322, 1994. ##
[20]. Hare C., “Protective Coating,” J. Coat. Technol., Vol. 72, pp. 21-27, 2000. ##
[21]. Defragata F. and Dopico J., “Anticorrosive behavior of zinc phosphate in alkyd and epoxy binders,” J. Oil Color Chem. Assoc., Vol. 81, pp. 273-285, 1998.##
[22]. Burkil A., “Limitation of zinc phosphate as an inhibitive pigment,” J. Oil Color Chem. Assoc., pp. 273-285, 1998.##
[23]. Benali O., Larabi L., Traisnel M., Gengembre L. and HarekY., “Electrochemical,theoretical and XPS studies of2-mercapto-1-methylimidazole adsorption on carbon steel in 1 M HClO,” Appl. Surf. Sci., Vol. 253, pp. 6130-6139, 2007.##
[24]. Cruz J., Martinez R., Genesca J. and GarciaOchoa E., “Experimental and theoretical study of 1(2ethylamino)2methylimidazoline as an inhibitor of carbon steel corrosion in acid media,” J. Electroanal. Chem.,Vol. 566, pp. 111-121, 2004.##
[25]. Migahed M. A. and Nassar I. F., “Corrosion inhibition of tubing steel during acidization of oil and gas wells,” Electrochim. Acta, Vol. 53, pp. 2877-2882, 2008.##
[26]. Khalifa M. A., ElBatouti M., Mahgoub F. and Bakr Aknish A., “Corrosion inhibition of steel in crude oil storagetanks,” Mater. Corros., Vol. 54, pp. 251-258, 2003.##
[27]. Wang L., “Evaluation of 2mercaptobenzimidazole as corrosion inhibitor for mild steel in phosphoric acid,” Corros. Sci., Vol. 43, pp. 2281-2289, 2001.##
[28]. Migahed M. A., AbdElRaouf M., AlSabagh A. M. and AbdElBary H. M., “Effectiveness of some non ionic surfactants as corrosion inhibitors for carbon steel pipelines in oilfield,” Electrochim. Acta, Vol. 50, pp. 4683-4689, 2005.##
[29]. Popova A., Christov M., Raicheva S. and Sokolova E., “Adsorption and inhibitive properties of benzimidazole derivatives in acid mild steel corrosion,” Corros. Sci., Vol. 46, pp. 1333-1350, 2004.##
[30]. Amar H., Tounsi A., Makayssi A., Derja A., Benzakour J. and Outzourhit A., “Corrosion inhibition of Armco iron by 2mercaptobenzimidazole in sodiumchloride 3% media,” Corros. Sci., Vol. 49, pp. 2936-2945, 2007.##
[31]. Khaled K. F., “The inhibition of benzimidazole derivatives on corrosion of iron in 1M HCl solutions,” Electrochim. Acta, Vol. 48, pp. 2493-2503, 2003.
[32]. Mansteld F. and Han L., “Analysis of electrochemical noise date for polymer coated steel in the time and frequency domains,” J. Electrochem. Soc., Vol. 143, pp. 286– 289, 1996.
[33]. Aligourani J., Raeissi K. and Golozar M. A., “Benzimidazole and its derivatives as corrosion inhibitors for mild steel in 1MHCl solution,” Corros. Sci., Vol. 51, pp. 1836-1843, 2009.
)